Mining Cable Ground-Check, XLPE/PVC
Application: Stationary, horizontal, HV mine power, distribution circuits
Standard: ICEA S-75-381/NEMA WC 58, ASTM B-3.MSHA listed; passes MSHA flame test
Conductors: Bare, soft drawn, annealed copper per ASTM B-3, compact stranded per ASTM B-496.
Insulation Material: XLPE
Use in stationary, horizontal, HV mine power, distribution circuits, for permanent or semi-portable applications with power transmission in deep mines ,open pits, tunnels, in conduit or duct, suitable for direct burial in wet or dry locations.
Conductors: bare, soft drawn, annealed copper per ASTM B-3, compact stranded per ASTM B-496.
Strand shield: extruded semi-conducting compound.
Insulation: flame resistant (90℃) cross-linked polyethylene (XLPE) ICEA S-75-381/NEMA WC-58.
Insulation shield: extruded semi-conducting compound. bare copper tape helically applied.
Color code: Black, White, Red nylon tracer tape applied between the insulation semi-conductive layer and the copper tape shield.
Ground wires: Uninsulated, soft drawn, annealed, compact stranded, bare copper per ASTM B-496, B-8 and B-33.
Ground check: soft drawn, soft drawn, annealed, compact stranded, bare copper with yellow EPR insulation.
Cabling: Three shielded conductors are assembled in a helical configuration with two uninsulated ground wires, one yellow insulated ground check and non-wicking fillers as needed .A woven nylon polyester reinforcement binder is served over the entire assembly for increased stability.
Reinforcement: A woven nylon polyester reinforcement binder is applied over the completed assembly for added core stability.
Jacket: Black flame retardant (90℃) PVC per ICEA S-75-381/NEMA WC-58. Available in optional colors
▪ Excellent resistance to oil , water, solvents, corrosives, sunlight, aging, cuts, tears and abrasions
•Resistant to most oils and chemicals, good cut, tear and abrasion resistance.
▪ MP-GC is suitable for all horizontal mine power distribution, messenger assisted high line transmission and direct burial in wet or dry locations requiring MSHA flame and/or UL approval listings.
▪ Jacket will have permanent marking via indent printed legend.
Meets or exceeds ICEA requirements as applicable for ICEA S-75-381/NEMA WC 58, ASTM B-3.MSHA listed; passes MSHA flame test.
5.Packaging & Shipping
Packing : by wooden drums or Iron wooden drum
Shipping: LCL, 20GP' 40GP' 40HP'
How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.Sample is free,but the freight charge should be paid
What is your Trad term?
We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the one which is the most convenient or cost effective for you
Welcome Inquiry !
For more details, please contact us at any time !
All we do are make your business more successful !
We are at your email@example.com