0.6/1KV XLPE insulation SWA Armoured PVC sheath power cable
0.6/1KV XLPE armoured power cable,XLPE insulation,Steel wire/Steel tape/Aluminum wire/ armoured,PVC sheath, low voltage power cable

0.6/1KV XLPE armoured power cable,XLPE insulation,Steel wire/Steel tape/Aluminum wire/ armoured,PVC sheath, low voltage power cable
Application
0.6/1KV XLPE insulation SWA Armoured PVC sheath power cable are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.
Standard
IEC60502-1
IEC60228
GB/T 12706
Or BS,ASTM,VDE standard
Construction
•Conductor: Copper or Aluminium conductor, round stranded or Shaped, Class 2 to IEC 60228, BS EN 60228.
•XLPE Insulation: as per IEC 60502 or BS 5467 rated for 90°C continuous operation.
•Inner sheath: Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted
• Armour: Aluminum/Galvanized Steel Wires applied helically over the bedding as per IEC 60502 or as per BS 5467, BS 6346. Single core cables shall be Aluminium wire armour. Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.
• Outer Sheath: shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE,LSF, CPE are available on request.
Sheath colour: Black
Technical data
Operating voltage:1000 V
Test voltage: 3500V, according to IEC 60502
Operation temperature:–25°C to + 90°C
Permissible short therm: + 250°C
Bending radius:
1.5mm2 to 16mm2 - Fixed: 6 x overall diameter
25mm2 and above - Fixed: 8 x overall diameter
Special version upon request
Core identification with white cores and black numbers
Aluminum wire armoured or steel tape armoured
Advantages
High electric strength, mechanical strength, high-ageing resisting, environmental stress resisting antichemical corrossion,and it is simple construction,using convenient and higher operating of long term temperature.It can be laid with no drop restriction.
Dimensions and Weights
Three core 0.6/1KV XLPE insulation SWA Armoured PVC sheath power cable
Nominal cross section | Approx. conductor dia. | Average insulation thickness | Nominal bedding thickness | Nominal steel Wire dia | Nominal sheath thickness | Approx. overall diameter | Approx. cable weight |
---|---|---|---|---|---|---|---|
n°x mm2 | mm | mm | mm | mm | mm | mm | kg/km |
3*1.5 | 1.6 | 0.7 | 1.2 | 0.9 | 1.8 | 15 | 380 |
3*2.5 | 2 | 0.7 | 1.2 | 0.9 | 1.8 | 15.5 | 400 |
3 x 4 | 2.6 | 0.7 | 1.2 | 0.9 | 1.8 | 16.5 | 460 |
3 x 6 | 3.1 | 0.7 | 1.2 | 0.9 | 1.8 | 18 | 540 |
3 x 10 | 4 | 0.7 | 1.2 | 0.9 | 1.8 | 19.5 | 750 |
3 x 16 | 5 | 0.7 | 1.2 | 1.25 | 1.8 | 22.5 | 1000 |
3 x 25 | 6.3 | 0.9 | 1.2 | 1.6 | 1.8 | 26 | 1510 |
3*35 | 7.4 | 0.9 | 1.2 | 1.6 | 1.8 | 28 | 1950 |
3*50 | 8.8 | 1 | 1.2 | 1.6 | 1.9 | 32 | 2350 |
3*70 | 10.6 | 1.1 | 1.2 | 2 | 2 | 35 | 3230 |
3*95 | 12.4 | 1.1 | 1.2 | 2 | 2.1 | 39 | 4050 |
3*120 | 14 | 1.2 | 1.2 | 2 | 2.3 | 43 | 5230 |
3*150 | 15.5 | 1.4 | 1.4 | 2.5 | 2.4 | 47 | 6750 |
3*185 | 17.4 | 1.6 | 1.4 | 2.5 | 2.6 | 52 | 8230 |
3*240 | 20.3 | 1.7 | 1.5 | 2.5 | 2.7 | 59 | 10510 |
3*300 | 22.7 | 1.8 | 1.6 | 2.5 | 2.9 | 64 | 13210 |
3*400 | 25.4 | 2 | 1.6 | 2.5 | 3.2 | 74 | 16100 |